![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778079.webp)
Command groups
Save On command Group
Use this group of commands to program the oscilloscope to save images,
measurements, waveforms, or the instrument setup, on triggers that you select.
Table 2-36: Save On commands
Command
Description
Sets or queries the location where
fi
les are saved.
Sets or queries the
fi
le name to use when SAVEON:TRIGer is ON.
Sets or queries the
fi
le format to be used for saved image
fi
les.
Sets or queries whether to save a screen capture when a trigger occurs.
Sets or queries whether to save a
fi
le when a trigger occurs.
Sets or queries whether to save a waveform when a limit test failure, mask failure,
or trigger occurs.
Sets or queries the
fi
le format for saving waveform.
Sets or queries the sources for saving waveforms.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-63
Summary of Contents for MSO54
