Tektronix MSO54, Programmer'S Manual

Page: 847 / 1026

Commands listed in alphabetical order
TRIGger:A:BUS:B1:PARallel:DATa:VALue
? might return
:TRIGGER:A:BUS:B1:PARALLEL:DATA:VALUE "X"
indicating the data value
is X.
TRIGger:{A|B}:BUS:B<x>:RS232C:CONDition
This command speci fi es the condition for an RS-232C trigger, where the bus
number is speci fi ed by< >x.
Conditions
Requires the SR-COMP Serial Triggering and Analysis Application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:RS232C:CONDition
{STARt|EOp|DATa|PARItyerror}
TRIGger:{A|B}:BUS:B<x>:RS232C:CONDition?
Arguments
STARt
sets the Trigger on condition to Start.
EOp
sets the Trigger on condition to End of Packet.
DATa
sets the Trigger on condition to Data.
PARItyerror
sets the Trigger on condition to Parity Error.
Examples
TRIGger:A:BUS:B1:RS232C:CONDition DATA
sets the trigger on condition
to data.
TRIGger:A:BUS:B1:RS232C:CONDition?
might return
:TRIGGER:A:BUS:B1:RS232C:CONDITION START
indicating start
is the trigger condition.
TRIGger:{A|B}:BUS:B<x>:RS232C:DATa:SIZe
This command sets or queries the length of the data string in bytes to be used
for an RS-232C trigger when the trigger condition is Data. The bus number is
speci
fi ed by <x>.
Conditions Requires the SR-COMP Serial Triggering and Analysis Application.
Group
Trigger
MSO54, MSO56, MSO58, MSO58LP Programmer 2-831