Tektronix MSO54, Programmer'S Manual

Page: 236 / 1026

Commands listed in alphabetical order
If you always want to transfer complete waveforms, set DATa:STARt to 1 and
DATa:STOP to the maximum record length, or larger.
Examples
DATA:STOP 15000
speci fi es that the waveform transfer will stop at data point
15000.
DATA:STOP?
might return
:DATA:STOP 14900
, indicating that 14900 is the last
waveform data point that will be transferred.
DATa:WIDth
This command speci fi es the width, in bytes per point, for waveform data
transferred from the oscilloscope via the CURVe? query. (This command is
synonymous with WFMOutpre:BYT_Nr .)
Group Waveform Transfer
Syntax
DATa:WIDth <NR1>
DATa:WIDth?
Related Commands WFMOutpre:BYT_Nr
Arguments
<NR1>
is an integer that indicates the number of bytes per point for the outgoing
waveform data when queried using the CURVe? command. For analog channels
the values can be 1 or 2. For digital channels, the values can be 1 or 2. For the
digital collection, the values can be 4 or 8.
Examples
DATA:WIDTH
1 sets the data width to 1 byte.
DATA:WIDTH
? might return
:DATA:WIDTH 1
indicating the width, in bytes per
point, for waveform data transferred bya the
CURVE?
query is 1 byte.
DATE? (Query Only)
This command queries the date that the instrument displays.
Group Miscellaneous
Syntax
DATE?
2-220 MSO54, MSO56, MSO58, MSO58LP Programmer