Tektronix MSO54, Programmer'S Manual

Page: 846 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:MIL1553B:TIMe:QUALi fi er
This command sets or queries the quali fi er to be used when triggering on response
time / inter message gap time for a MIL-STD-1553 bus. The bus number is
speci
fi ed by x. The trigger condition must be set to TIMe.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MIL1553B:TIMe:QUALifier
{LESSthan|MOREthan|INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:MIL1553B:TIMe:QUALifier?
Related Commands TRIGger:{A|B}:BUS:B<x>:MIL1553B:TIMe:LESSLimit , TRIGger:{A|B}:BUS:
B<x>:MIL1553B:TIMe:MORELimit
Arguments Arguments are the available comparison quali fi ers.
Examples
TRIGGER:A:BUS:B1:MIL1553B:TIME:QUALIFIER LESSTHAN
sets the time
comparison quali fi er to less than.
TRIGGER:A:BUS:B1:MIL1553B:TIME:QUALIFIER?
might return
OUTRANGE, indicating that the quali fi er is set to out-of-range comparison.
TRIGger:{A|B}:BUS:B<x>:PARallel:DATa:VALue
This command speci fi es the binary data string used for a Parallel Bus trigger.
The bus number is speci fi ed by <x>.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:PARallel:DATa:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:PARallel:DATa:VALue?
Arguments
<QString>
is the binary data string used for a Parallel Bus trigger.
Examples
TRIGger:A:BUS:B1:PARallel:DATa:VALue "11001101"
sets the data
value to 11001101.
2-830 MSO54, MSO56, MSO58, MSO58LP Programmer