Tektronix MSO54, Programmer'S Manual

Page: 811 / 1026

Commands listed in alphabetical order
Arguments
LESSthan
sets the cycle count quali fi er to less than.
MOREthan
sets the cycle count quali fi er to more than.
EQual
sets the cycle count quali fi er to equal.
UNEQual
sets the cycle count quali fi er to not equal.
LESSEQual
sets the cycle count quali fi er to less than or equal.
MOREEQual
sets the cycle count quali fi er to greater than or equal.
INrange
sets the cycle count quali fi er to in range.
OUTrange
sets the cycle count quali fi er to out of range.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:QUALIFIER LESSTHAN
sets the
cycle count quali fi er to LESSTHAN.
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:QUALIFIER?
might return
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:QUALIFIER EQUAL
indicating
that the cycle count quali fi er is set to EQUAL.
TRIGger:{A|B}:BUS:B<x>:FLEXray:CYCLEcount:VALue
This command speci fi es the low value when triggering on the FlexRay bus cycle
count fi eld. (Use TRIGger:{A|B}:BUS:B<x>:FLEXray:CYCLEcount:HIVALue
to set the upper value.) The trigger condition must be set to CYCLEcount (using
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition ).The bus number is speci fi ed
by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLEXray:CYCLEcount:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:FLEXray:CYCLEcount:VALue?
Arguments
<QString>
is a quoted binary data string that represents the cycle count low
value.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:VALUE "11001101"
sets the
cycle count value to 11001101.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-795