Commands listed in alphabetical order
Examples
MEASUREMENT:FILTERS:LOWPASS:SPEC SECOND
speci
fi
es a second order low
pass
fi
lter.
MEASUREMENT:FILTERS:LOWPASS:SPEC
? might return
:MEASUREMENT:FILTERS:LOWPASS:SPEC NONE
indicating no low
pass
fi
lter.
MEASUrement:FILTers:RAMPtime
This command sets or queries the global
fi
lter ramp time for the measurement.
Group
Measurement
Syntax
MEASUrement:FILTers:RAMPtime <NR3>
MEASUrement:FILTers:RAMPtime?
Arguments
<NR3>
is the current
fi
lter ramp time.
Examples
MEASUREMENT:FILTERS:RAMPTIME 3.0
sets the ramp time to 3.0.
MEASUREMENT:FILTERS:RAMPTIME
? might return
:MEASUREMENT:FILTERS:RAMPTIME 2.0000
indicating the ramp time is 2.0.
MEASUrement:GATing
This command sets or queries the global gating type for the measurement.
Group
Measurement
Syntax
MEASUrement:GATing {NONE|SCREEN|CURSor|LOGic|SEARch}
MEASUrement:GATing?
Arguments
NONE
turns off measurement gating.
SCREen
turns on gating, using the left and right edges of the screen.
CURSor
limits measurements to the portion of the waveform between the vertical
bar cursors, even if they are off screen.
LOGic
speci
fi
es that measurements are taken only on the portion of the waveform
where the logic source is in the active state.
SEARCH
speci
fi
es that measurements are taken based on search criteria.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-405
Summary of Contents for MSO54
