Tektronix MSO54, Programmer'S Manual

Page: 668 / 1026

Commands listed in alphabetical order
INrange
sets the quali fi er to in range.
OUTrange
sets the quali fi er to out of range.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:QUALIFIER
LESSTHAN
sets the quali fi er to "less than".
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:QUALIFIER?
might
return
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:QUALIFIER
EQUAL
indicating that the quali fi er is set to
EQUAL
.
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe
This command speci fi es the length of the data string, in bytes, to use when
searching on the Ethernet bus signal. The search condition needs to be set to
DATa
. The search number is speci fi ed by <x>.
Conditions Requires the SR-ENET Triggering and Analysis application.
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
Related Commands SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition
Arguments The minimum and default values are 1, and the maximum value is 16.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:SIZE 4
speci fi es 4 as
the number of contiguous TCP/IPv4/MAC client bytes to use when searching on
the Ethernet data
fi eld.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:SIZE?
might return 6,
indicating that 6 is the currently speci fi ed number of contiguous TCP/IPv4/MAC
client bytes to use when searching on the Ethernet data fi eld.
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue
This command speci fi es the binary value to use when searching on the Ethernet
bus signal. The search condition needs to be set to
DATa
. The search number is
speci fi ed by <x>.
2-652 MSO54, MSO56, MSO58, MSO58LP Programmer