Commands listed in alphabetical order
Examples
TRIGGER:B:RESET:EDGE:COUPLING
HFREJ sets high frequency low
sensitivity.
TRIGGER:B:RESET:EDGE:COUPLING
? might return
:TRIGGER:B:RESET:EDGE:COUPLING DC indicating DC trigger coupling
is selected.
TRIGger:B:RESET:EDGE:LEVel
This command sets the voltage level to use for an Edge Reset trigger when
triggering on an analog channel waveform.
Group
Trigger
Syntax
TRIGger:B:RESET:EDGE:LEVel <NR3>
Arguments
<NR3>
is the voltage level to use for an Edge Reset trigger when triggering on
an analog channel waveform.
Examples
TRIGGER:B:RESET:EDGE:LEVEL
50.0e-3 sets the level to 50.0 mV.
TRIGGER:B:RESET:EDGE:LEVEL
? might return
:TRIGGER:B:RESET:EDGE:LEVEL 0.0E+0 indicating the level is set to 0.0 V.
TRIGger:B:RESET:EDGE:SLOpe
This command sets or queries the trigger slope for a sequential edge trigger reset.
Group
Trigger
Syntax
TRIGger:B:RESET:EDGE:SLOpe {RISe|FALL|EITher}
TRIGger:B:RESET:EDGE:SLOpe?
Arguments
RISe
speci
fi
es to reset the trigger on the rising or positive edge of a signal.
FALL
speci
fi
es to reset the trigger on the falling or negative edge of a signal.
EITHER
speci
fi
ed to reset the trigger on either the rising or falling edge of a signal.
Examples
TRIGGER:B:RESET:EDGE:SLOPE
FALL speci
fi
es to reset the trigger on the
falling or negative edge of a signal.
2-880
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
