![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778057.webp)
Command groups
Table 2-31: Measurement commands (cont.)
Command
Description
MEASUrement:CLOCKRecovery:ADVanced:
METHod
This command sets or queries the global advanced clock recovery method.
MEASUrement:CLOCKRecovery:
CLOCKFrequency
This command sets or queries the global clock frequency used for
fi
xed constant
clock recovery.
MEASUrement:CLOCKRecovery:
CLOCKMultiplier
This command sets or queries the global clock multiplier used for explicit clock
recovery.
MEASUrement:CLOCKRecovery:
CONSTCLOCKMODe
This command sets or queries the global constant clock mode used for constant
clock recovery.
MEASUrement:CLOCKRecovery:DAMPing
This command sets or queries the global damping value used for PLL clock recovery.
MEASUrement:CLOCKRecovery:DATAPath
This command sets or queries the global
fi
le containing the data pattern used for
known data pattern clock recovery.
MEASUrement:CLOCKRecovery:DATARate
This command sets or queries the global nominal data bit rate used for nominal data
rate clock recovery.
MEASUrement:CLOCKRecovery:
EXPLICITCLOCKMODe
This command sets or queries the global explicit clock mode used for explicit clock
recovery.
MEASUrement:CLOCKRecovery:JTFBandwidth
This command sets or queries the global JTF bandwidth used for PLL clock recovery.
MEASUrement:CLOCKRecovery:
LOOPBandwidth
This command sets or queries the global loop bandwidth used for PLL clock recovery.
MEASUrement:CLOCKRecovery:
MEANAUTOCalculate
This command sets or queries how often the clock is calculated for constant clock
recovery.
MEASUrement:CLOCKRecovery:METHod
This command sets or queries the global clock recovery method.
MEASUrement:CLOCKRecovery:MODel
This command sets or queries the global PLL clock recovery model used for PLL
clock recovery.
MEASUrement:CLOCKRecovery:
NOMINALOFFset
This command sets or queries the global offset value used for explicit clock recovery.
MEASUrement:CLOCKRecovery:
NOMINALOFFset:SELECTIONtype
This command sets or queries the global offset type used for explicit clock recovery.
MEASUrement:CLOCKRecovery:STAndard
This command sets or queries the global communications standard used for PLL
clock recovery.
The command deletes the speci
fi
ed measurement.
This command sets or queries the dirac model used to separate random from
deterministic jitter for jitter measurements.
This command sets or queries the display units used for jitter summary measurements.
Sets or queries the type of the edge for the measurement.
This command sets or queries the state of high-performance eye rendering for an
eye diagram.
MEASUrement:FILTers:BLANKingtime
This command sets or queries the global
fi
lter blanking time.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-41
Summary of Contents for MSO54
