Commands listed in alphabetical order
To change the password, you must
fi
rst enter the valid password with the
PASSWord command and then change to your new password with the NEWpass
command. Remember that the password is case sensitive.
Group
Miscellaneous
Syntax
PASSWord <QString>
Related Commands
,
Arguments
<QString>
is the password, which can contain up to 10 characters. The factory
default password is “XYZZY” and is always valid.
Examples
PASSWORD "XYZZY"
enables the *PUD and NEWPass set commands.
PASSWORD
disables the
*PUD
and
NEWPass
set commands. You can still use the
query version of *PUD.
PAUSe (No Query Form)
This command causes the interface to pause the speci
fi
ed number of seconds
before processing any other commands.
Group
Miscellaneous
Syntax
PAUSe <NR3>
Arguments
<NR3>
is the speci
fi
ed number of seconds the interface is to pause before
processing any other commands. The pause time is speci
fi
ed as a
fl
oating point
value in seconds and must be > 0.0 and
≥
1800.0.
Examples
PAUSE 10.0e0;:ACQUIRE:NUMACQ
causes the interface to pause 10 seconds
before returning the number of acquisitions.
PLOT:ADDNew (No Query Form)
This command adds the speci
fi
ed plot.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-519
Summary of Contents for MSO54
