Commands listed in alphabetical order
MEASUrement:MEAS<x>:EDGES:N
The command sets or queries the number of accumulation cycles for the
measurement when the measurement type is nperiod. Measurements are speci
fi
ed
by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:N <NR3>
MEASUrement:MEAS<x>:EDGES:N?
Arguments
<NR3>
is the maximum number of edges used by the measurement.
Examples
measurement:meas1:edges:n 2
sets the number of edges to 2.
measurement:meas1:edges:n?
might return
:MEASUREMENT:MEAS1:EDGES:N 6.0000
.
MEASUrement:MEAS<x>:EDGES:SLEWRATEMethod
This command sets or queries the slew rate method for the measurement.
Measurements are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:SLEWRATEMethod {NOMinal|DDR}
MEASUrement:MEAS<x>:EDGES:SLEWRATEMethod?
Arguments
NOMinal
speci
fi
es the nominal slew rate method.
DDR
speci
fi
es the DDR slew rate method.
Examples
measurement:meas1:edges:slewratemethod NOMINAL
speci
fi
es the
nominal slew rate method.
measurement:meas1:edges:slewratemethod?
might return
:MEASUREMENT:MEAS1:EDGES:SLEWRATEMETHOD NOMINAL
indicating the
slew rate method is set to NOMINAL.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-445
Summary of Contents for MSO54
