![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778337.webp)
Commands listed in alphabetical order
Examples
DVM:SOURCE CH4
sets the DVM source to Channel 4.
DVM:TRIGger:FREQuency:COUNTer
This command sets or queries the state of the trigger frequency counter readout
in the trigger badge. This command requires the DVM option (free with product
registration).
Group
DVM
Syntax
DVM:TRIGger:FREQuency:COUNTer {0|1|OFF|ON}
DVM:TRIGger:FREQuency:COUNTer?
Arguments
1
or
ON
turns on the trigger frequency counter for the Digital Voltmeter.
0
or
OFF
turns it off.
Examples
DVM:TRIGGER:FREQUENCY:COUNTER 0
turns off the counter.
DVM:TRIGGER:FREQUENCY:COUNTER?
might return
:DVM:TRIGGER:FREQUENCY:COUNTER 1
indicating the counter is on.
*ESE
This command sets and queries the bits in the Event Status Enable Register
(ESER). The ESER prevents events from being reported to the Status Byte
Register (STB). For a more detailed discussion of the use of these registers, see
Registers.
Group
Status and Error
Syntax
*ESE <NR1>
*ESE?
Related Commands
,
,
,
,
,
Arguments
<NR1>
speci
fi
es the binary bits of the ESER according to this value, which ranges
from 0 through 255.
The power-on default for the ESER is 0 if *PSC is 1. If *PSC is 0, the ESER
maintains the previous power cycle value through the current power cycle.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-321
Summary of Contents for MSO54
