![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778803.webp)
Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:ETHERnet:MAC:ADDRess:SOUrce:VALue
When the Ethernet trigger condition is set to
MACADDress
, this command
speci
fi
es the 48–bit MAC source address value that is to be used in the trigger
(along with the destination address value). The default is all X’s (don’t care).
The bus number is speci
fi
ed by <x>.
NOTE.
MAC Addresses are 48–bit values such as 08:00:11:1E:C9:AE hex.
Conditions
Requires the SR-ENET Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:ETHERnet:MAC:ADDRess:SOUrce:VALue
<QString>
TRIGger:{A|B}:BUS:B<x>:ETHERnet:MAC:ADDRess:SOUrce:VALue?
Related Commands
TRIGger:{A|B}:BUS:B<x>:ETHERnet:CONDition
TRIGger:{A|B}:BUS:B<x>:ETHERnet:MAC:ADDRess:DESTination:VALue
Arguments
<QString>
is a quoted string of up to 48 characters where the allowable
characters are 0, 1, and X. The bits speci
fi
ed in the quoted string replace the least
signi
fi
cant bits, leaving any unspeci
fi
ed upper bits unchanged.
Examples
TRIGger:A:BUS:B1:ETHERnet:MAC:ADDRess:SOUrce:VALue
”XXXXXXXXXX01010111111100000001111010101010101000”
would set the
MAC destination address to trigger on to XX:35:FC:07:AA:C8 hex.
TRIGger:A:BUS:B1:ETHERnet:MAC:ADDRess:SOUrce:VALue?
might
return
”XXXXXXXXXX01010111111100000001111010101010101000”
.
TRIGger:{A|B}:BUS:B<x>:ETHERnet:MAC:LENgth:HIVALue
When the Ethernet trigger condition is set to
MACLENgth
, and the quali
fi
er is set to
INrange
or
OUTrange
, this command speci
fi
es the upper data value of the range.
(Use the command
TRIGger:{A|B}:BUS:B<x>:ETHERnet:MAC:LENgth:VALue
to specify the lower limit of the range.) The default is all X’s (don’t care). The
bus number is speci
fi
ed by <x>.
Conditions
Requires the SR-ENET Triggering and Analysis application.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-787
Summary of Contents for MSO54
