![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778458.webp)
Commands listed in alphabetical order
Arguments
FALL
speci
fi
es the falling edge of the waveform.
RISE
speci
fi
es the rising edge of the waveform.
BOTH
speci
fi
es both a rising and falling edge of the waveform.
SAMEas
speci
fi
es that both edges of the waveform are the same.
OPPositeas
speci
fi
es that the edges of the waveform are not the same.
Examples
MEASUREMENT:MEAS3:DELAY:EDGE2 RISE
speci
fi
es that the rising edge of the
waveform be used for measurement 3.
MEASUREMENT:MEAS1:DELAY:EDGE2?
might return
:MEASUREMENT:MEAS1:DELAY:EDGE2 FALL
, indicating that the falling edge
of the waveform is being used for measurement 1.
MEASUrement:MEAS<x>:DISPlaystat:ENABle
This command turns on and off display of statistics in measurement badges in the
user interface. This command affects only the display of statistics, basic-statistics
are computed regardless of the state of this command. Measurements are speci
fi
ed
by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:DISPlaystat:ENABle {OFF|ON|<NR1>}
MEASUrement:MEAS<x>:DISPlaystat:ENABle
?
Arguments
OFF
turns off the display of statistics in measurement badges.
ON
turns on the display of statistics in measurement badges.
<NR1>
= 0 turns off the display of statistics in the measurement badge, any other
value turns on the display of statistics.
Examples
MEASUrement:MEAS<x>:DISPlaystat:ENABle 0
turns off the display of
statistics in the measurement badge.
MEASUrement:MEAS<x>:DISPlaystat:ENABle?
might return
:MEASUREMENT:MEAS1:DISPLAYSTAT:ENABLE 1
indicating that the display of
statistics in the measurement badge is on.
2-442
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
