![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778460.webp)
Commands listed in alphabetical order
MEASUrement:MEAS<x>:EDGES:LEVel
This sets or queries the level type for the 'time outside level' measurement.
Measurements are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:LEVel {HIGH|LOW|BOTH}
MEASUrement:MEAS<x>:EDGES:LEVel?
Arguments
HIGH
speci
fi
es the HIGH level.
LOW
speci
fi
es the LOW level.
BOTH
speci
fi
es both the HIGH and LOW level.
Examples
MEASUrement:MEAS1:EDGES:LEVel LOW
sets the level to the low level.
MEASUrement:MEAS1:EDGES:LEVel?
might return
:MEASUREMENT:MEAS1:EDGES:LEVEL HIGH
indicating the level is set to
the high level.
MEASUrement:MEAS<x>:EDGES:LOWERFREQuency
This command sets or queries the lower frequency for the measurement when the
measurement type is phase noise. Lower frequencies are ignored. Measurements
are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:LOWERFREQuency <NR3>
MEASUrement:MEAS<x>:EDGES:LOWERFREQuency?
Arguments
<NR3>
is the lower frequency of the edge.
Examples
MEASUrement:MEAS1:EDGES:LOWERFREQuency 1.0e3
sets the lower
frequency to 1 kHz.
MEASUrement:MEAS1:EDGES:LOWERFREQuency?
might return
:MEASUREMENT:MEAS1:EDGES:LOWERFREQUENCY 0.0E+0
indicating the
lower frequency is set to 0.0 Hertz.
2-444
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
