Tektronix MSO54, Programmer'S Manual

Page: 910 / 1026

Commands listed in alphabetical order
Related Commands DATa:SOUrce , WFMOutpre:BN_Fmt , WFMOutpre:ENCdg
Returns Returns the domain of the outgoing waveform.
Examples
WFMOUTPRE:DOMAIN?
might return
:WFMOUTPRE:DOMAIN TIME
, indicating that
the outgoing waveform is time domain trace.
WFMOutpre:ENCdg
This command sets and queries the type of encoding for outgoing waveforms.
Group
Waveform Transfer
Syntax
WFMOutpre:ENCdg {ASCii|BINary}
WFMOutpre:ENCdg?
Related Commands DATa:ENCdg , WFMOutpre:BYT_Nr , WFMOutpre:BYT_Or ,
WFMOutpre:BIT_Nr , WFMOutpre:BN_Fmt
Arguments
ASCii
speci fi es that the outgoing data is to be in
ASCII
format. Waveforms
internally stored as integers will be sent as <NR1> numbers, while those stored as
fl oating point will be sent as <NR3> numbers.
BINary
speci fi es that outgoing data is to be in a binary format whose further
speci fi cation is determined by WFMOutpre:BYT_Nr , WFMOutpre:BIT_Nr ,
WFMOutpre:BN_Fmt and WFMOutpre:BYT_Or .
Examples
WFMOUTPRE:ENCDG ASCii
speci fi es that the outgoing waveform data will be
sent in ASCII format.
WFMOUTPRE:ENCDG?
might return
:WFMOUTPRE:ENCDG BINary
, indicating that
outgoing waveform data will be sent in binary format.
WFMOutpre:NR_Pt? (Query Only)
This query-only command returns the number of points for the DATa:SOUrce
waveform that will be transmitted in response to a CURVe ? query.
Group
Waveform Transfer
2-894 MSO54, MSO56, MSO58, MSO58LP Programmer