Tektronix MSO54, Programmer'S Manual

Page: 816 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:FLEXray:ERRTYPE
This command speci fi es the error type when triggering on the FlexRay
bus signal. The trigger condition needs to be set to ERROR (using
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition
). The bus number is speci fi ed
by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLEXray:ERRTYPE
{CRCHeader|CRCTrailer|SYNCFrame|STARTupnosync|NULLFRStatic|
NULLFRDynamic}
TRIGger:{A|B}:BUS:B<x>:FLEXray:ERRTYPE?
Arguments
CRCHeader
sets the error type to CRCHeader.
CRCTrailer
sets the error type to CRCTrailer.
SYNCFrame
sets the error type to SYNCFrame.
STARTupnosync
sets the error type to STARTupnosync.
NULLFRStatic
sets the error type to NULLFRStatic.
NULLFRDynamic
sets the error type to NULLFRDynamic.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE SYNCFRAME
sets the trigger type
is SYNCFRAME.
TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE?
might return
TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE CRCHEADER
indicating the
FlexRay trigger type is CRCHeader.
TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEID:HIVALue
This command speci fi es the high value when triggering on the FlexRay bus
frame ID fi eld. (Use TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEID:VALue
to set the low value.) The trigger condition needs to be set to IDenti fi er (using
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition ). The bus number is speci fi ed
by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
2-800 MSO54, MSO56, MSO58, MSO58LP Programmer