Tektronix MSO54, Programmer'S Manual

Page: 170 / 1026

Commands listed in alphabetical order
Group Bus
Syntax
BUS:B<x>:LIN:SAMPLEpoint <NR1>
BUS:B<x>:LIN:SAMPLEpoint?
Arguments
<NR1>
is a percentage that represents the point at which to sample during each
bit period.
Examples
BUS:B1:LIN:SAMPLEPOINT 10
sets the sample point to 10% of the bit period
BUS:B1:LIN:SAMPLEPOINT?
might return
BUS:B1:LIN:SAMPLEPOINT 50
indicating that the sample point is set to 50% of the bit period
BUS:B<x>:LIN:SOUrce
This command sets or queries the LIN data source for the speci fi ed bus. The
bus number is speci fi ed by x.
Conditions Requires option SR-AUTO.
Group Bus
Syntax
BUS:B<x>:LIN:SOUrce
{CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
BUS:B<x>:LIN:SOUrce?
Arguments Arguments specify the available sources.
Examples
BUS:B1:LIN:SOUrce MATH4
sets the source to MATH 4
BUS:B1:LIN:SOUrce?
might return
:BUS:B1:LIN:SOURCE CH1
, indicating
the source is set to channel 1.
BUS:B<x>:LIN:SOUrce:THReshold
This command sets or queries the LIN source threshold for the speci fi ed bus. The
bus is speci fi ed by x.
Conditions Requires option SR-AUTO.
2-154 MSO54, MSO56, MSO58, MSO58LP Programmer