Tektronix MSO54, Programmer'S Manual

Page: 785 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:TDMVALue
This command sets or queries the binary data string for the single or low data word
to be used when triggering on an TDM audio bus signal. The trigger condition
must be set to DATa using
TRIGger:{A|B}:BUS:B{x}:AUDio:CONDition
.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:TDMVALue
<QString>
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:TDMVALue?
Arguments
<QString>
is the binary data string for the single or low data word to be used
when triggering on an TDM audio bus signal.
Examples
TRIGger:A:BUS:B1:AUDio:DATa:TDMVALue "1100"
sets the TDMVALUE
to 1100.
TRIGger:A:BUS:B1:AUDio:DATa:TDMVALue?
might
return
:TRIGGER:A:BUS:B1:AUDIO:DATA:TDMVALUE
"XXXXXXXXXXXXXXXXXXXX1010"
indicating the TDM value is
1010.
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:VALue
This command sets the lower word value to be used when triggering on
an audio bus signal. The trigger condition must be set to DATa using
TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition .
The bus number is speci fi ed by <x>.
Conditions
Requires the SR-AUDIO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:VALue?
Arguments
<QString>
speci fi es the trigger data lower word.
Examples
TRIGger:A:BUS:B1:AUDio:DATa:VALue "11001100101"
sets the data
value to XXXXXXXXXXXXX11001100101.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-769