Commands listed in alphabetical order
Syntax
MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:FALLLow <NR3>
MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:FALLLow?
Arguments
<NR3>
is the low reference level in volts. The default is 0.0 V.
Examples
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0 V
sets the
low reference level to 0.0 V.
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW?
might return
:MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0000E+00
,
indicating that the absolute low reference level is set to 0.0 V.
MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:FALLMid
This command sets or queries the value used as the mid reference level of
the falling edge when the measurement's ref level method is set to absolute.
Measurements are speci
fi
ed by x.
NOTE.
This command affects the results of period, frequency, delay, and all
cyclic measurements.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:FALLMid <NR3>
MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:FALLMid?
Arguments
<NR3>
is the mid reference level in volts. The default is 0.0 V.
Examples
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLMID 0.5
sets the mid
reference level for the delay waveform to 0.5 V.
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLMID?
might return
:MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLMID 0.5000E+00
,
indicating that the absolute mid reference level is set to 0.5 V.
MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:HYSTeresis
This command sets or queries the value of the hysteresis of the reference level
when the measurement's ref level method is set to absolute. The measurement
number is speci
fi
ed by x.
2-470
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
