![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778100.webp)
Command groups
Table 2-40: Trigger commands (cont.)
Command
Description
TRIGger:{A|B}:UPPerthreshold:CH<x>
Sets or queries the CH<x> upper trigger level.
Sets or queries the window trigger threshold crossing of the selected trigger Source.
TRIGger:{A|B}:WINdow:LOGICQUALi
Speci
fi
es whether or not to use logic quali
fi
cation for a window trigger.
Sets or queries the source for a window trigger.
Sets or queries the window trigger event.
Sets or queries the minimum width for a window violation.
Sets the A, B, or B Reset trigger level automatically to 50% of the range of the
minimum and maximum values of the trigger input signal.
Sets or queries the type of holdoff for the A trigger.
Sets or queries the A trigger holdoff time.
Sets or queries the type of logic quali
fi
cation to perform.
Sets or queries the A trigger mode.
Sets or queries the Auxiliary Input voltage level to use for an edge trigger.
Sets or queries B trigger time or event quali
fi
ers.
Sets or queries the number of events that must occur before the B trigger occurs.
Sets the B reset trigger level to 50%.
Sets or queries the trigger coupling for a sequential edge trigger reset when the
Source is set to an analog channel.
Sets the voltage level to use for an Edge Reset trigger when triggering on an analog
channel waveform.
Sets or queries the trigger slope for a sequential edge trigger reset.
Sets or queries the trigger source for the A
→
B sequential edge trigger reset feature.
Sets or queries the reset timer for a sequential timeout trigger reset.
Sets or queries the type of A
→
B sequential trigger reset.
Returns the current state of the triggering system.
Sets or queries the B trigger delay time.
Returns the current state of the triggering system.
2-84
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
