Tektronix MSO54, Programmer'S Manual

Page: 899 / 1026

Commands listed in alphabetical order
Arguments
ON
indicates that the B trigger is active and causes trigger events with the A trigger.
OFF
indicates that only the A trigger causes trigger events.
<NR1>
A 0 turns off the B trigger; any other value activates the B trigger.
Examples
TRIGGER:B:STATE ON
sets the B trigger to active, making it capable of causing
trigger events.
TRIGGER:B:STATE?
might return
:TRIGGER:B:STATE 0
, indicating that the B
trigger is inactive and that only the A trigger causes trigger events.
TRIGger:B:TIMe
This command sets or queries B trigger delay time, in seconds. The B Trigger
time applies only if TRIGger:B:BY is set to TIMe.
Group Trigger
Syntax
TRIGger:B:TIMe <NR3>
TRIGger:B:TIMe?
Related Commands TRIGger:B:BY , TRIGger:B:EVENTS:COUNt TRIGger:B:STATE
Arguments
<NR3>
is the B trigger delay time in seconds.
Examples
TRIGGER:B:TIME 4E-6
sets the B trigger delay time to 4 µs.
TRIGGER:B:TIME?
might return
:TRIGGER:B:TIME 16.0000E-9
, indicating
that the B trigger time is set to 16 ns.
TRIGger:STATE? (Query Only)
This query-only command returns the current state of the triggering system.
Group Trigger
Syntax
TRIGger:STATE?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-883