Tektronix MSO54, Programmer'S Manual

Page: 892 / 1026

Commands listed in alphabetical order
TRIGger:A:HOLDoff:TIMe
This command sets or queries the A trigger holdoff time. This command is
equivalent to selecting Mode & Holdoff from the Trig menu, selecting Time, and
then setting the desired Holdoff Time.
Group Trigger
Syntax
TRIGger:A:HOLDoff:TIMe <NR3>
TRIGger:A:HOLDoff:TIMe?
Related Commands TRIGger:A:HOLDoff:BY
Arguments
<NR3>
speci fi es the holdoff time in seconds. The range is from 0 seconds through
10 seconds.
Examples
TRIGGER:A:HOLDOFF:TIME 10
sets the A trigger holdoff time to 10 s.
TRIGGER:A:HOLDOFF:TIME?
might return
:TRIGGER:A:HOLDOFFTIME
1.2000E-06
, indicating that the A trigger holdoff time is set to 1.2 µs.
TRIGger:A:LOGICQUALi fi cation
This command sets or queries the type of logic quali fi cation to perform.
Group
Trigger
Syntax
TRIGger:A:LOGICQUALification {AND|OR|NAND|NOR}
TRIGger:A:LOGICQUALification?
Arguments
AND
speci fi es to trigger if all conditions are true.
NANd
speci fi es to trigger if any of the conditions are false.
NOR
speci fi es to trigger if all conditions are false.
OR
speci fi es to trigger if any of the conditions are true.
Examples
TRIGGER:A:LOGICQUALIFICATION
OR speci fi es to trigger if any of the
conditions are true.
2-876 MSO54, MSO56, MSO58, MSO58LP Programmer