![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778101.webp)
Command groups
Vertical command group
Use the commands in the Vertical Command Group to control the vertical setup of
all live (channel) waveforms for acquisition and to control the display of channel,
reference, and math waveforms. Analog channels are available when analog
probes are attached to FlexChannel inputs.
You can replace VOLts with SCAle in the vertical commands. This provides
program compatibility with earlier models of Tektronix instruments.
Table 2-41: Vertical commands
Command
Description
Returns vertical parameters for the speci
fi
ed channel.
Sets or queries the bandwidth of the speci
fi
ed channel.
Sets or queries the coupling setting for the speci
fi
ed channel.
Sets or queries the deskew time for the speci
fi
ed channel.
Sets or queries the color of the speci
fi
ed channel label.
Sets or queries the bold state of the speci
fi
ed channel label.
Sets or queries the italic state of the speci
fi
ed channel label.
Sets or queries the font size of the speci
fi
ed channel label.
Sets or queries the font type of the speci
fi
ed channel label.
Sets or queries the underline state of the speci
fi
ed channel label.
De
fi
nes or queries the label for the channel waveform.
Sets or queries the X display coordinate for the channel waveform label.
Sets or queries the Y display coordinate for the channel waveform label.
Sets or queries the channel offset.
Sets or queries the vertical position for the speci
fi
ed analog channel.
Returns all information concerning the probe that is attached to the speci
fi
ed
channel.
Autozeros the probe attached to the speci
fi
ed channel.
Starts a degauss cycle of the probe attached to the speci
fi
ed channel.
Queries whether the probe attached to the speci
fi
ed channel requires a
degauss operation.
Sets the attached probe to its default range, or it queries the default range
of the probe.
Returns the gain of the probe that is attached to the speci
fi
ed channel.
Returns the type and serial number of the probe that is attached to the speci
fi
ed
channel.
Returns the serial number of the probe that is attached to the speci
fi
ed channel.
Returns the type of probe that is attached to the speci
fi
ed channel.
Queries the resistance of the probe that is attached to the speci
fi
ed channel.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-85
Summary of Contents for MSO54
