Tektronix MSO54, Programmer'S Manual

Page: 779 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:ARINC429A:LABel:HIVALue
This command sets or queries the high value when triggering on an ARINC429
label
fi eld. The bus number is speci fi ed by x. The trigger condition must be set to
LABel, and the label quali
fi er must be INrange or OUTrange.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:ARINC429A:LABel:HIVALue
<QString>
TRIGger:{A|B}:BUS:B<x>:ARINC429A:LABel:HIVALue?
Arguments
<QString>
is the label value.
Examples
TRIGGER:A:BUS:B1:ARINC429A:LABEL:HIVALUE "XXXX1010"
sets the
value to XXXX1010.
TRIGGER:A:BUS:B1:ARINC429A:LABEL:HIVALUE?
might return
"XXXXXXXX", indicating that the value is XXXXXXXX.
TRIGger:{A|B}:BUS:B<x>:ARINC429A:LABel:QUALi fi er
This command sets or queries the quali fi er to be used when triggering on label
data for an ARINC429 bus signal. The bus number is speci fi ed by x. The trigger
condition must be set to LABel or LABELANDDATA.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:ARINC429A:LABel:
QUALifier
{EQual|UNEQual|LESSthan|MOREthan
|LESSEQual|MOREEQual|INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:ARINC429A:LABel:QUALifier?
Arguments Arguments are the available data quali fi ers.
NOTE. If the trigger condition is set to LABELANDDATA, the label quali fi er will
be locked to Equal until the trigger condition is changed again.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-763