Tektronix MSO54, Programmer'S Manual

Page: 718 / 1026

Commands listed in alphabetical order
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition
{DATAPacket|EOP|ERRor|HANDSHAKEPacket|RESET|RESUME|
SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
Arguments
DATAPacket
speci fi es the search condition as Data Packet.
EOP
speci fi es the search condition as End of Packet.
ERROR
speci fi es the search condition as Error.
HANDSHAKEPacket
speci fi es the search condition as Handshake Packet.
RESET
speci fi es the search condition as Reset.
RESUME
speci fi es the search condition as Resume.
SPECIALPacket
speci fi es the search condition as Special Packet.
SUSPEND
speci fi es the search condition as Suspend.
SYNC
speci fi es the search condition as Sync.
TOKENPacket
speci fi es the search condition as Token (Address) Packet.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:CONDITION EOP
sets the search
condition for USB bus trigger search 1 to End of Packet.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:CONDITION?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:USB:CONDITION SYNC
, indicating that
the search condition for USB bus trigger search 1 is set to Sync.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue
This command sets or queries the high binary data value used with In Range and
Out of Range quali
fi ers for a USB bus search to determine where to place a mark.
The search number is speci fi ed by <x>. The search condition must be set to DATA.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
2-702 MSO54, MSO56, MSO58, MSO58LP Programmer