Tektronix MSO54, Programmer'S Manual

Page: 552 / 1026

Commands listed in alphabetical order
POWer:POWer<x>:GATing
This command sets or queries the gating type for the speci fi ed power measurement
badge. The power measurement badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:GATing
{NONE | CURSOR | SCREEN | LOGIC}
POWer:POWer<x>:GATing?
Arguments
NONE
makes measurement across the entire waveform record.
CURSOR
makes measurements on that portion of the waveform between the
cursors. Selecting Cursors opens cursors on the measurement source. Set the
cursors so that the waveform area of interest is in between the cursors.
SCREEN
takes measurements on that portion of the waveform shown in the
display. When Zoom is on, the display is the zoom window.
LOGIC
takes measurements only when the logical state of a speci fi ed waveform is
true.
Examples
POWer:POWer1:GATing CURSOR
sets the gating type for the power
measurement badge 1 as Cursor.
POWer:POWer2:GATing?
might return SCREEN indicating the con fi gured
gating type for the power measurement badge 2.
POWer:POWer<x>:GATing:GLOBal
This command sets or queries the gating settings for the speci fi ed power
measurement badge. The power measurement badge is speci fi ed by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:GATing:GLOBal
{ON | OFF 1 | 0}
POWer:POWer<x>:GATing:GLOBal?
2-536 MSO54, MSO56, MSO58, MSO58LP Programmer