Tektronix MSO54, Programmer'S Manual

Page: 304 / 1026

Commands listed in alphabetical order
"???? ????";:DISPLAY:WAVEVIEW1:CURSOR:CURSOR:STATE
1;FUNCTION WAVEFORM;SCREEN:AYPOSITION
-2.0E-3;BXPOSITION -5.0E-6;BYPOSITION -2.0E-3;AXPOSITIO N
-5.0E-6;:DISPLAY:WAVEVIEW1:CURSOR:CURSOR:MODE
INDEPENDENT;ASOURCE AUTO;DDT
9.91E+37;ONEOVERDELTATVALUE 100.0E+3;SPLITM ODE
SAME;LINESTYLE SOLID.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:ASOUrce
This command sets or queries the cursor A source of the speci fi ed cursor in the
speci fi ed waveview.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Cursor<x>
is the speci fi ed cursor and must be
CURSOR1
.
Group Cursor
Syntax
DISplay:WAVEView<x>:CURSor:CURSOR<x>:ASOUrce
{AUTO|CH<x>|BUS<x>|MATH<x>| REF<x>|PLOT<x>}
DISplay:WAVEView<x>:CURSor:CURSOR<x>:ASOUrce?
Arguments Arguments are the speci fi ed source waveform.
Examples
DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce CH1
sets the cursor 1
source to channel 1.
DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?
might return
:DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:ASOURCE REF1
indicating the
cursor A source is reference 1.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:BSOUrce
This command sets or queries the cursor B source of the speci fi ed cursor in the
speci fi ed waveview.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Cursor<x>
is the speci fi ed cursor and must be
CURSOR1
.
Group Cursor
2-288 MSO54, MSO56, MSO58, MSO58LP Programmer