Commands listed in alphabetical order
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet
This command sets or queries the data offset value, in bytes, to use when searching
on the CAN data
fi
eld. The search number is speci
fi
ed by x. The search condition
must be set to DATA or IDANDDATA.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet
<NR1>
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue
Arguments
<NR1>
is an integer whose minimum and default values are -1 (don't care) and
maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO
CAN FD). The maximum is dependent on the number of bytes being matched
and the CAN standard selected. Its value is calculated as [Absolute Maximum] -
[Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN
FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum
data match size is 1 byte, which produces the ranges listed above. Increasing the
data match size above 1 byte will adjust the range of valid data offset values
accordingly.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:DATA:OFFSET 5
sets the CAN data
offset to 5 bytes.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:DATA:OFFSET?
might return 7,
indicating the CAN data offset is 7 bytes. If the CAN standard is set for CAN 2.0
and the search data size is set to 3, the maximum value for the data offset will be 5
(8 - 3 = 5). If the CAN standard is set for ISO CAN FD or Non-ISO CAN FD
and the search data size is set to 8, the maximum value for the data offset will be
56 (64 - 8 = 56).
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALi
fi
er
This command sets or queries the CAN bus trigger data quali
fi
er to be used when
searching on a CAN bus signal. The search number is speci
fi
ed by <x>.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-643
Summary of Contents for MSO54
