Commands listed in alphabetical order
Arguments
<QString>
speci
fi
es the address value. This is either a 7-bit or 10-bit value
depending on the address mode. The valid characters are 0-9, A-F, and X for
addresses in hexadecimal format; and 0, 1, and X otherwise.
Examples
SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:ADDRESS:VALUE "01XXXXX"
sets
the address value to "01XXXXX" when the mode is ADDR7 and the format
is binary.
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:ADDRESS:VALUE?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:ADDRESS:VALUE "XX"
, indicating
that the address value is "XX" when the address mode is set to ADDR7 and the
address format is hexadecimal.
SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition
This command sets or queries the search condition for an I2C bus. The search
number is speci
fi
ed by <x>.
Conditions
Requires the SR-EMBD Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition
{ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
Arguments
ADDress
speci
fi
es the trigger condition as Address.
ADDRANDDATA
speci
fi
es the trigger condition as Address and Data.
DATa
speci
fi
es the trigger condition as Data.
ACKMISS
speci
fi
es the trigger condition as Missing of Acknowledgement.
REPEATstart
speci
fi
es the trigger condition as Repeat of Start.
STARt
speci
fi
es the trigger condition as Start.
STOP
speci
fi
es the trigger condition as Stop.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:CONDITION ADDRESS
sets the
trigger condition for I2C bus trigger search 1 to Address.
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:CONDITION?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:CONDITION ADDRANDDATA
,
MSO54, MSO56, MSO58, MSO58LP Programmer
2-675
Summary of Contents for MSO54
