![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778459.webp)
Commands listed in alphabetical order
MEASUrement:MEAS<x>:EDGEIncre
This command sets or queries the edge increment value for the measurement.
Measurements are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGEIncre <NR3>
MEASUrement:MEAS<x>:EDGEIncre?
Arguments
<NR3>
is the measurements edge increment value.
Examples
:MEASUREMENT:MEAS2:EDGEINCRE?
might return
:MEASUREMENT:MEAS2:EDGEINCRE 1.0000
indicating the edge increment
value is set to 1.0000.
MEASUrement:MEAS<x>:EDGES:FROMLevel
This command sets or queries the 'from level' edge for the measurement.
Measurements are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:FROMLevel {MID|LOW|HIGH}
MEASUrement:MEAS<x>:EDGES:FROMLevel?
Arguments
MID
speci
fi
es the MID level.
HIGH
speci
fi
es the HIGH level.
LOW
speci
fi
es the LOW level.
Examples
MEASUrement:MEAS1:EDGES:FROMLevel HIGH
set the from level to the high
level
MEASUrement:MEAS1:EDGES:FROMLevel?
might return
:MEASUREMENT:MEAS1:EDGES:FROMLEVEL LOW
indicating the from
level is the low level.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-443
Summary of Contents for MSO54
