Tektronix MSO54, Programmer'S Manual

Page: 272 / 1026

Commands listed in alphabetical order
Group Cursor
Syntax
DISplay:PLOTView<x>:CURSor:SPLITMODE {SAME SPLIT}
DISplay:PLOTView<x>:CURSor:SPLITMODE?
Arguments
SAME
speci fi es that both cursors are on the same waveform.
SPLIT
speci fi es that the cursors can be on different waveforms.
Examples
DISplay:PLOTView1:CURSor:SPLITMODE SAME
sets the cursors to be on the
same waveform.
DISplay:PLOTView1:CURSor:SPLITMODE?
might return
:DISPLAY:PLOTVIEW1:CURSOR:SPLITMODE SAME
indicating both
cursors are on the same waveform.
DISplay:PLOTView<x>:CURSor:STATE
This command sets or queries the visible state of the cursor of the speci fi ed cursor
in the speci fi ed view.
Group Cursor
Syntax
DISplay:PLOTView<x>:CURSor:STATE {OFF|ON|<NR1>}
DISplay:PLOTView<x>:CURSor:STATE?
Arguments
OFF
disables the speci fi ed cursor.
ON
enables the speci fi ed cursor.
<NR1>
= 0 disables the speci fi ed cursor; any other value enables the speci fi ed
cursor.
Examples
DISplay:PLOTView1:CURSor:STATE OFF
disables the speci fi ed cursor.
DISplay:PLOTView5:CURSor:STATE?
might return
:DISPLAY:PLOTVIEW5:CURSOR:STATE 1
indicating cursors are on.
DISplay:PLOTView<x>:CURSor:VBArs:APOSition
This command sets or queries the vertical cursor A position of the speci fi ed cursor
in the speci fi ed view.
2-256 MSO54, MSO56, MSO58, MSO58LP Programmer