![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778849.webp)
Commands listed in alphabetical order
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:SPI:CONDition {SS|STARTofframe|DATa}
TRIGger:{A|B}:BUS:B<x>:SPI:CONDition?
Related Commands
Arguments
SS
speci
fi
es the Slave Selection condition.
STARTofframe
is applicable when
BUS:B<x>:SPI:FRAMING
is set to
IDLEtime
. When the trigger condition is set to
STARTofframe
, the instrument
triggers on the
fi
rst SPI clock after an idle time when there are no clocks.
DATa
sets the trigger condition to Master-In Slave-Out and Master-Out Slave-In.
TRIGger:{A|B}:BUS:B<x>:SPI:DATa:SIZe
This command speci
fi
es the length of the data string to be used for a SPI trigger if
the trigger condition is DATa. The bus number is speci
fi
ed by <x>.
Conditions
Requires the SR-COMP Serial Triggering and Analysis Application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:SPI:DATa:SIZe <NR1>
TRIGger:{A|B}:BUS:B<x>:SPI:DATa:SIZe?
Arguments
<NR1>
is the length of the data string in bytes.
Examples
TRIGger:A:BUS:B1:SPI:DATa:SIZe 1
sets the data size to 1 byte.
TRIGger:A:BUS:B1:SPI:DATa:SIZe?
might return
:TRIGGER:A:BUS:B1:SPI:DATA:SIZE 1
indicating the data size is
1 byte.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-833
Summary of Contents for MSO54
