Commands listed in alphabetical order
Examples
CH3:OFFSET 2.0E-3
sets the offset for Channel 3 to 2 mV.
CH4:OFFSET?
might return
:CH4:OFFSET 1.0000E-03
, indicating that the
offset for Channel 4 is set to 1 mV.
CH<x>:POSition
This command sets or queries the vertical position for the speci
fi
ed analog channel.
Group
Vertical
Syntax
CH<x>:POSition
<NR1>
Arguments
<NR1>
is the vertical position for the speci
fi
ed analog channel.
Examples
CH2:POSition -2.0
sets the position to -2 divisions.
CH2:POSition?
might return
:CH2:POSITION -2.2400
indicating the
position is -2.24 divisions.
CH<x>:PRObe? (Query Only)
This query-only command returns all information concerning the probe that is
attached to the speci
fi
ed channel. The channel is speci
fi
ed by x.
Group
Vertical
Syntax
CH<x>:PRObe?
Related Commands
Examples
CH2:PROBE?
might return
:CH2:PROBE:GAIN 1.0000E-01; RESISTANCE
1.0000E+07;UNITS "V";ID:TYPE "10X"'SERNUMBER "N/A"
for a 10X
probe, indicating that (among other parameters) the attenuation factor for the probe
attached to Channel 2 is 100.0 mV (assuming that probe units are set to volts).
MSO54, MSO56, MSO58, MSO58LP Programmer
2-195
Summary of Contents for MSO54
