Tektronix MSO54, Programmer'S Manual

Page: 621 / 1026

Commands listed in alphabetical order
Arguments
<NR1>
is the location (control in divisions) where the waveform label for the
selected reference is displayed, relative to the left edge of the screen.
Examples
REF:REF4:LABEL:XPOS 10
moves the waveform label for the Reference 3
waveform, so that it begins 10 divisions to the right of the left edge of the screen.
REF:REF2:LABEL:XPOS?
might return
:REF:REF2:LABEL:XPOS 1.5
,
indicating that the x-axis for the Reference 2 waveform is currently 1.5 divisions
to the right of the left edge of the screen.
REF:REF<x>:LABel:YPOS
This command sets or queries the Y-position of the label (attached to the displayed
waveform of the speci
fi ed reference), relative to the baseline of the waveform.
The reference waveform is speci fi ed by x.
Group Vertical
Syntax
REF:REF<x>:LABel:YPOS <NR1>
REF:REF<x>:LABel:YPOS?
Arguments
<NR1>
is the location where the waveform label for the selected reference is
displayed, relative to the baseline of the waveform.
Examples
REF:REF3:LABEL:YPOS -10
moves the waveform label for the Reference 3
waveform 10 vertical units below the baseline of the waveform.
REF:REF2:LABEL:YPOS?
might return
:REF:REF2:LABEL:YPOS 0
, indicating
that the waveform label for the Reference 2 waveform is currently located at
the baseline of the waveform.
REF:REF<x>:SOUrce
This command sets or queries the fi lename used by the given reference.
Group Vertical
Syntax
REF:REF<x>:SOUrce <QString>
Arguments
<QString>
is the reference fi le name.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-605