Commands listed in alphabetical order
Syntax
SEARCH:SEARCH<x>:TRIGger:A:TYPe
{EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|
WINdow|Bus}
SEARCH:SEARCH<x>:TRIGger:A:TYPe?
Arguments
EDGE
triggers when the source input signal amplitude crosses the speci
fi
ed level
in the direction given by the slope.
NOTE.
Some trigger types are optional.
RUNT
triggers when a pulse crosses the
fi
rst preset voltage threshold but
does not cross the second preset threshold before recrossing the
fi
rst. The
thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and
SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
TRANsition
triggers when a pulse crosses both thresholds in the same direction
as the speci
fi
ed polarity and the transition time between the two threshold
crossings is greater or less than the speci
fi
ed time delta.
PULSEWidth
triggers on input signal source pulses that are
inside or outside of the given time range speci
fi
ed by
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit.
The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT:
POLarity command.
TIMEOut
triggers on an input signal source that stays above, stays below, or stays
either above or beow the trigger level for a given time.
LOGIc
speci
fi
es that a search occurs when speci
fi
ed conditions are met, and is
controlled by the SEARCH:A:LOGIc commands.
SETHold
triggers on a functional pattern combination of one to three data sources
at the time of the clock transition.
WINdow
triggers on an input signal source that enters or exits the horizontal band
de
fi
ned by the two trigger levels.
Bus
speci
fi
es that a search occurs when a communications signal is found.
Examples
SEARCH:SEARCH1:TRIGGER:A:TYPE RUNT
sets the trigger type setting for
search 1 to RUNT.
SEARCH:SEARCH1:TRIGGER:A:TYPE?
might return
:SEARCH:SEARCH1:TRIGGER:A:TYPE EDGE
, indicating that the trigger type
setting for search 1 is set to EDGE.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-745
Summary of Contents for MSO54
