Commands listed in alphabetical order
NOTE.
The start and end bits are interpreted based on the type of split transaction:
For Interrupt and control transactions, the S bit means Speed: 0 = Full Speed, 1
= Low Speed.
For bulk IN/OUT and isochronous IN start-split transactions, the S
fi
eld must be 0.
For bulk/control IN/OUT, interrupt IN/OUT, and isochronous IN start-split
transactions, the E
fi
eld must be 0.
For full-speed isochronous OUT start-split transactions, the S (Start) and E
(End)
fi
elds specify how the high-speed data payload corresponds to data for a
full-speed data packet as shown below:
S E High-speed to Full-speed Data Relation
0 0 High-speed data is the middle of the full-speed data payload.
0 1 High-speed data is the end of the full-speed data payload.
1 0 High-speed data is the beginning of the full-speed data payload.
1 1 High-speed data is all of the full speed data payload.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:SE:VALue
{NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:SE:VALue?
Related Commands
TRIGger:{A|B}:BUS:B<x>:USB:SPECIALType
Arguments
NOCARE
— any combination of S and E bits.
FULLSPEED
— S bit = 0, E bit = 0.
LOWSPEED
— S bit = 1, E bit = 0.
ISOSTART
— S bit = 1, E bit = 0.
ISOMID
— see note above.
ISOEND
— see note above.
ISOALL
— see note above.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-847
Summary of Contents for MSO54
