![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778328.webp)
Commands listed in alphabetical order
Syntax
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:HORizontal:POSition <NR3>
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:HORizontal:POSition?
Arguments
<NR3>
is a value from 0 to 100.00 and is the percent of the waveform that is to the
left of screen center, when the zoom factor is 2× or greater.
Examples
DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:POSITION 50
sets the
horizontal position of the zoom box of waveview1 to 50 so that it is centered
horizontally on the screen.
DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:POSITION?
might return
:DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:POSITION 10.0000
,
indicating that the horizontal position of the zoom box of waveview 1 is centered
over the
fi
rst major graticule division.
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:HORizontal:SCALe
This command sets or queries the horizontal zoom factor of the speci
fi
ed zoom in
the speci
fi
ed waveview.
NOTE.
WAVEView<x>
is the speci
fi
ed waveview and must be
WAVEView1
.
ZOOM<x>
is the speci
fi
ed zoom and must be
ZOOM1
.
Group
Zoom
Syntax
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:HORizontal:SCALe <NR3>
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:HORizontal:SCALe?
Arguments
<NR3>
is the amount of expansion in the horizontal direction in 1-2-4 increments
of the speci
fi
ed zoom in the speci
fi
ed waveview.
Examples
DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe 5
sets the horizontal
zoom factor of zoom1 in waveview1 to 5x.
DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?
might return
:DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe 10
, indicating that
the zoom factor of waveview1 is set to 10x.
2-312
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
