![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778052.webp)
Command groups
Table 2-29: Horizontal commands (cont.)
Command
Description
HORizontal:FASTframe:XZEro:REF?
Returns the sub-sample time between the trigger sample (designated by PT_OFF)
and the occurrence of the actual trigger for the waveform speci
fi
ed by the
DATa:SOUrce command for the reference frame.
HORizontal:FASTframe:XZEro:SELECTED?
Returns the sub-sample time between the trigger sample (designated by PT_OFF)
and the occurrence of the actual trigger for the waveform speci
fi
ed by the
DATa:SOUrce command for the selected frame.
Returns the main horizontal time base interpolation ratio.
Sets or queries the horizontal mode.
HORizontal:MODe:AUTOmatic:FASTAcq:
RECOrdlength:MAXimum:VALue
Sets or queries the horizontal FastAcq maximum record length.
HORizontal:MODe:AUTOmatic:FASTAcq:
RECOrdlength:MAXimum:ZOOMOVERride
Sets or queries the
fl
ag which allows override of the horizontal FastAcq maximum
record length.
HORizontal:MODe:MANual:CONFIGure
Sets or queries which horizontal control (scale or record length) will also change
when the sample rate is adjusted.
Sets or queries the record length.
Sets or queries the sample rate.
Sets or queries the horizontal scale.
Sets or queries the waveform horizontal position, in percent, that is used when
delay is off.
Returns the display system preview state.
Sets or queries the horizontal record length.
Queries the horizontal roll mode status.
Sets or queries the horizontal sample rate.
HORizontal:SAMPLERate:ANALYZemode:
MINimum:OVERRide
Sets or queries the
fl
ag which allows override of the horizontal analyze minimum
sample rate.
HORizontal:SAMPLERate:ANALYZemode:
MINimum:VALue
Sets or queries the minimum sample rate used by Analysis Automatic horizontal
mode.
Sets or queries the horizontal scale.
2-36
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
