Tektronix MSO54, Programmer'S Manual

Page: 215 / 1026

Commands listed in alphabetical order
Group Vertical
Syntax
CH<x>:PRObe:ID:TYPe?
Examples
CH1:PROBE:ID:TYPE?
might return
:CH1:PROBE:ID:TYPE "TCP0030"
,
indicating that a TCP0030 current probe is attached to Channel 1.
CH<x>:PRObe:RESistance? (Query Only)
This query-only command returns the resistance of the probe that is attached to
the speci
fi ed channel. The channel is speci fi ed by x.
Group Vertical
Syntax
CH<x>:PRObe:RESistance?
Examples
CH2:PROBE:RESISTANCE?
might return
:CH2:PROBE:RESISTANCE
1.0000E+06
, indicating that the input resistance of the probe attached to
Channel 2 is 1 M Ω .
CH<x>:PRObe:SET
This command sets or queries aspects of probe accessory user interfaces, for
example probe attenuation factors or probe audible over range. The available
arguments for this command will vary depending on the accessory you attach to
the instrument. The channel is speci
fi ed by x.
Group Vertical
Syntax
CH<x>:PRObe:SET <QString>
CH<x>:PRObe:SET?
Arguments
<QString>
is a quoted string representing a settable aspect of the attached
accessory.
Examples
CH6:PRObe:SET "ATTENUATION 5X"
setting the probe to 25X attenuation.
CH6:PRObe:SET?
might return
:CH6:PROBE:SET "ATTENUATION
25X"
indicating that the probe is set to the selection for 25X attenuation.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-199