![background image](http://html.mh-extra.com/html/tektronix/mso54/mso54_programmers-manual_1078778462.webp)
Commands listed in alphabetical order
MEASUrement:MEAS<x>:EDGES:TOLevel
This command sets or queries the 'to level' edge for the measurement.
Measurements are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:TOLevel {HIGH|MID|LOW}
MEASUrement:MEAS<x>:EDGES:TOLevel?
Arguments
HIGH
speci
fi
es the HIGH level.
MID
speci
fi
es the MID level.
LOW
speci
fi
es the LOW level.
Examples
MEASUrement:MEAS1:EDGES:TOLevel HIGH
speci
fi
es the High to level.
MEASUrement:MEAS1:EDGES:TOLevel?
might return
:MEASUREMENT:MEAS1:EDGES:TOLEVEL LOW
indicating the to level
edge is set to the Low level.
MEASUrement:MEAS<x>:EDGES:UPPERFREQuency
This command sets or queries the upper frequency for the measurement when the
measurement type is phase noise. Higher frequencies are ignored. Measurements
are speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:EDGES:UPPERFREQuency <NR3>
MEASUrement:MEAS<x>:EDGES:UPPERFREQuency?
Arguments
<NR3>
is the upper frequency of the edge.
Examples
MEASUrement:MEAS1:EDGES:UPPERFREQuency 1.5
sets the upper frequency
to 1.5 MHz.
MEASUrement:MEAS1:EDGES:UPPERFREQuency?
might return
:MEASUREMENT:MEAS1:EDGES:UPPERFREQUENCY 1.0000E+6
indicating the
upper frequency is 1.0 MHz.
2-446
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
