Tektronix MSO54, Programmer'S Manual

Page: 777 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:QUALi fi er
This command sets or queries the quali fi er to be used when triggering on data in
the DATA fi eld for an ARINC429 bus signal. The bus number is speci fi ed by x.
The trigger condition must be set to DATa or LABELANDDATA.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:
QUALifier
{EQual|UNEQual|LESSthan|MOREthan
|LESSEQual|MOREEQual|INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:QUALifier?
Arguments
Arguments are the available data quali fi ers.
NOTE.
The trigger quali fi er only applies to the bits de fi ned as the data fi eld via
the bus data fi eld format speci fi er (using
BUS:B<x>:ARINC429A:DATAFORmat
)
Examples
TRIGGER:A:BUS:B1:ARINC429A:DATA:QUALIFIER LESSTHAN
sets the data
quali fi er to less than.
TRIGGER:A:BUS:B1:ARINC429A:DATA:QUALIFIER?
might return EQUAL,
indicating that the data quali fi er is set to equal.
TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:VALue
This command sets or queries the low value when triggering on an ARINC429
data
fi eld. The bus number is speci fi ed by x. The trigger condition must be set to
DATa or LABELANDDATA.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:VALue
<QString>
TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:VALue?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-761