Commands listed in alphabetical order
MEASUrement:AUTOset (No Query Form)
This command performs an analysis jitter autoset.
Group
Measurement
Syntax
MEASUrement:AUTOset EXECute
Examples
MEASUREMENT:AUTOSET EXECute
performs an analysis jitter autoset.
MEASUrement:CH<x>:REFLevels:ABSolute:FALLHigh
This command sets or queries the value used as the high reference level of the
falling edge when the source ref level method is set to absolute. The channel
number is speci
fi
ed by x.
Group
Measurement
Syntax
MEASUrement:CH<x>:REFLevels:ABSolute:FALLHigh <NR3>
MEASUrement:CH<x>:REFLevels:ABSolute:FALLHigh?
Arguments
<NR3>
is the high reference level, and is the zero percent level when
MEASUrement:IMMed:REFLevel:METHod is set to Absolute.
Examples
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLHIGH 1.5
sets the high
reference level of the falling edge to 1.5 V.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLHIGH?
might return
:MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLHIGH 1.0000
indicating
that the high reference level of the falling edge is 1.0 V.
MEASUrement:CH<x>:REFLevels:ABSolute:FALLLow
This command sets or queries the value used as the low reference level of the
falling edge when the source ref level method is set to absolute. The channel
number is speci
fi
ed by x.
Group
Measurement
2-382
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
