Tektronix MSO54, Programmer'S Manual

Page: 726 / 1026

Commands listed in alphabetical order
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue
{BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
Arguments
BULK
speci fi es the Endpoint Type value as Bulk (10).
CONTROL
speci fi es the Endpoint Type value as Control (00).
NOCARE
speci fi es the Endpoint Type value as Don’t Care.
INTERRUPT
speci fi es the Endpoint Type value as Interrupt (11).
ISOchronous
speci fi es the Endpoint Type value as Isochronous (01).
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:ET:VALUE BULK
sets the
Endpoint Type value for USB bus trigger search 1 to Bulk.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:ET:VALUE?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:ET:VALUE DONTCARE
,
indicating that the Endpoint Type value for USB bus trigger search 1 is set to
DONTCare.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue
This command sets or queries the binary hub address value to be used when
searching on a USB bus signal. The search number is speci
fi ed by <x>. The
search condition must be set to Special with packet type SPLIT.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
Arguments
<QString>
speci fi es the hub address. The valid characters are .
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE "1001"
sets
the hub address to "XXX1001".
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE "XX"
(for
binary format), indicating that the hub address for the USB bus trigger search
on split token
fi eld is "XX".
2-710 MSO54, MSO56, MSO58, MSO58LP Programmer