Tektronix MSO54, Programmer'S Manual

Page: 694 / 1026

Commands listed in alphabetical order
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition
{DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
Arguments Arguments are the available trigger conditions.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:LIN:CONDition DATA
sets the trigger
condition to data.
SEARCH:SEARCH1:TRIGger:A:BUS:LIN:CONDition?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:CONDITION SYNC
, indicating the
trigger condition is sync.
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue
This command sets or queries the high data value string used in a LIN bus search.
The search number is speci
fi ed by <x>. The search condition must be DATA or
IDANDDATA and the data quali fi er must be INRANGE or OUTRANGE.
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
Arguments
<QString>
is a quoted string of 1s, 0s, or Xs representing the binary data string
to be used in a LIN search if the search condition is
IDentifier
or
IDANDDATA
(identi fi er and data).
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:DATA:HIVALUE?
might
return
SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:DATA:HIVALUE
"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXX"
indicating the high value is "don't care".
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALi fi er
This command sets or queries the data quali fi er used in a LIN bus search. The
search number is speci fi ed by <x>.
2-678 MSO54, MSO56, MSO58, MSO58LP Programmer