Tektronix MSO54, Programmer'S Manual

Page: 813 / 1026

Commands listed in alphabetical order
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:OFFSet <NR1>
TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:OFFSet?
Arguments
<NR1>
is the offset of the data string in bytes. A byte offset of -1 signi fi es “don't
care”, and no byte offset is used. The instrument will trigger on or match any
byte value that
fi ts.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:DATA:OFFSET 1
sets the offset to 1.
TRIGGER:A:BUS:B1:FLEXRAY:DATA:OFFSET?
might return
TRIGGER:A:BUS:B1:FLEXRAY:DATA:OFFSET 0
indicating that a data offset
of 0.
TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:QUALi fi er
This command speci fi es the quali fi er (<, >, =, <=, >=, not =, in range,
out of range) to use when triggering on the FlexRay bus data fi eld.
The trigger condition needs to be set to ID or IDANDDATA (using
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition ). The bus number is speci fi ed
by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|
INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:QUALifier?
Arguments
LESSthan
sets the data quali fi er to less than.
MOREthan
sets the data quali fi er to greater than.
EQual
sets the data quali fi er to eqaual.
UNEQual
sets the data quali fi er to not equal.
LESSEQual
sets the data quali fi er to less than or equal.
MOREEQual
sets the data quali fi er to greater than or equal.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-797