Tektronix MSO54, Programmer'S Manual

Page: 422 / 1026

Commands listed in alphabetical order
Examples
MEASUREMENT:GATING SCREEN
turns on measurement gating, using the left
and right edges of the screen.
MEASUREMENT:GATING?
might return
:MEASUREMENT:GATING CURSOR
,
indicating that measurements are limited to the portion of the waveform between
the vertical bar cursors.
MEASUrement:GATing:ACTive
This command sets or queries the global gating active level used for logic gating.
Group Measurement
Syntax
MEASUrement:GATing:ACTive {HIGH|LOW}
MEASUrement:GATing:ACTive?
Arguments
HIGH
speci fi es the gate is HIGH.
LOW
speci fi es the gate is LOW.
Examples
MEASUREMENT:GATING:ACTIVE LOW
speci fi es a low gate.
MEASUREMENT:GATING:ACTIVE
? might return
:MEASUREMENT:GATING:ACTIVE HIGH
indicating the gate is high.
MEASUrement:GATing:HYSTeresis
This command sets or queries the global gating hysteresis value used for logic
gating.
Group
Measurement
Syntax
MEASUrement:GATing:HYSTeresis <NR3>
MEASUrement:GATing:HYSTeresis?
Arguments
<NR3>
is the gating hysteresis.
2-406 MSO54, MSO56, MSO58, MSO58LP Programmer