Tektronix MSO54, Programmer'S Manual

Page: 504 / 1026

Commands listed in alphabetical order
Arguments
FORWard
speci fi es a forward search to the edge.
BACKWard
speci fi es a backward search to the edge.
Examples
MEASUrement:MEAS1:TOEDGESEARCHDIRect FORWARD
speci fi es a forward
search to the edge.
MEASUrement:MEAS1:TOEDGESEARCHDIRect?
might return
:MEASUREMENT:MEAS1:TOEDGESEARCHDIRECT FORWARD
indicating the
instrument will search in the forward direction for the to edge.
MEASUrement:MEAS<x>:TRANSition
This command sets or queries the transition edges fl ag for the measurement. The
measurement number is speci fi ed by x.
Group Measurement
Syntax
MEASUrement:MEAS<x>:TRANSition {<NR1>|OFF|ON}
Arguments
<NR1>
= 1, the measurement is computed on rising (if measurement type is
rise time) or falling edges (if measurement type is fall time) following a double
transition only. If it is set to 0, the measurement is computed on all rising (if
measurement type is rise time) or falling (if measurement type is fall time) edges.
OFF
computes the measurement on all rising (if measurement type is rise time)
or falling (if measurement type is fall time) edges.
ON
computes the measurement on rising (if measurement type is rise time) or
falling edges (if measurement type is fall time) following a double transition only.
Examples
MEASUrement:MEAS1:TRANSition 1
specifyingthe measurement is computed
on rising (if measurement type is rise time) or falling edges (if measurement type
is fall time) following a double transition only.
MEASUrement:MEAS1:TRANSition?
might return
:MEASUREMENT:MEAS1:TRANSITION 0
indicating the measurement is
computed on all rising (if measurement type is rise time) or falling (if
measurement type is fall time) edges.
MEASUrement:MEAS<x>:TYPe
This command sets or queries the measurement type. The measurement number
is speci
fi ed by x.
2-488 MSO54, MSO56, MSO58, MSO58LP Programmer