Tektronix MSO54, Programmer'S Manual

Page: 532 / 1026

Commands listed in alphabetical order
Syntax
MEASUrement:REF<x>:REFLevels:PERCent:TYPE
{TENNinety|TWENtyeighty|CUSTom}
MEASUrement:REF<x>:REFLevels:PERCent:TYPE?
Arguments
TENNinety
sets the values for Low, Mid and High Ref to 10%, 50% and 90%
respectively.
TWENtyeighty
sets the values for Low, Mid and High Ref are set to 20%, 50%
and 80% respectively.
CUSTom
allows setting other reference level percents.
Examples
MEASUrement:REF1:REFLevels:PERCent:TYPE TWENTYEIGHTY
sets the
values for Low, Mid and High Ref are set to 20%, 50% and 80% respectively.
MEASUrement:REF1:REFLevels:PERCent:TYPE?
might return
:MEASUREMENT:REF1:REFLEVELS:PERCENT:TYPE TENNINETY
indicating the
values for Low, Mid and High Ref to 10%, 50% and 90% respectively.
MEASUrement:STATIstics:CYCLEMode
This command turns on and off cycle to cycle measurement statistics tracking
and affects computation and display of cycle-cycle statistics in the Measurement
Result table. It affects measurement statistics after being enabled and after new
data is acquired and measured.
Group Measurement
Syntax
MEASUrement:STATIstics:CYCLEMode {OFF|ON|0|1}
MEASUrement:STATIstics:CYCLEMode?
Arguments
OFF
turns off statistics for all measurements. This is the default value.
ON
turns on statistics and displays all statistics for each measurement.
0
turns off statistics for all measurements.
1
turns on statistics and displays all statistics for each measurement.
Examples
MEASUREMENT:STATISTICS:CYCLEMODE OFF
turns off statistics for all
measurements.
MEASUREMENT:STATISTICS:CYCLEMODE
? might return
:MEASUREMENT:STATISTICS:CYCLEMODE 1
indicating that
statistics are displayed for each measurement.
2-516 MSO54, MSO56, MSO58, MSO58LP Programmer