Tektronix MSO54, Programmer'S Manual

Page: 561 / 1026

Commands listed in alphabetical order
Syntax
POWer:POWer<x>:LINERIPPLE:INPUTSOurce
{CH<x> | MATH<x> |
REF<x>}
POWer:POWer<x>:LINERIPPLE:INPUTSOurce?
Arguments
CH<x>
= A channel speci fi er; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:LINERIPPLE:INPUTSOurce CH1
sets channel 1 as the input
source for line ripple measurement of power measurement badge Power 1.
POWer:POWer<x>:LINERIPPLE:LFREQuency
This command sets or queries the frequency present for line ripple measurement
in the speci
fi ed power measurement badge. The power measurement badge
is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:LINERIPPLE:LFREQuency
{FIFty | SIXty |
FOURHundred}
POWer:POWer<x>:LINERIPPLE:LFREQuency?
Examples
POWer:POWer1:LINERIPPLE:LFREQuency FIFTY
sets the frequency present
for line ripple measurement as 50 Hz.
POWer:POWer<x>:NDUTYCYCLE:EDGEType
This command sets or queries the clock edge type for negative duty cycle
measurement in the speci
fi ed power measurement badge. The power measurement
badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
MSO54, MSO56, MSO58, MSO58LP Programmer 2-545